1. Identificação | |
Tipo de Referência | Artigo em Evento (Conference Proceedings) |
Site | mtc-m16c.sid.inpe.br |
Código do Detentor | isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S |
Identificador | 8JMKD3MGP8W/34C6852 |
Repositório | sid.inpe.br/mtc-m18@80/2008/12.08.16.45 |
Repositório de Metadados | sid.inpe.br/mtc-m18@80/2008/12.08.16.45.27 |
Última Atualização dos Metadados | 2018:06.04.04.05.52 (UTC) administrator |
Chave Secundária | INPE--PRE/ |
Chave de Citação | SerbenaZaFoLeSoGuUe:2008:FrWeNi |
Título | Friction and Wear of Nitrogen Ion Implantation and Plasma Immersion Ion Implantation on AISI 304 Stainless Steel |
Ano | 2008 |
Data de Acesso | 13 maio 2024 |
Tipo Secundário | PRE CN |
|
2. Contextualização | |
Autor | 1 Serbena, F. C. 2 Zaika, A. C. 3 Foerster, C. E. 4 Lepienski, C. M. 5 Soares Júnior, P. C. 6 Guimarães, J. L. 7 Ueda, Mário |
Grupo | 1 2 3 4 5 6 7 LAP-CTE-INPE-MCT-BR |
Afiliação | 1 Universidade Estadual de Ponta Grossa 2 Universidade Estadual de Ponta Grossa 3 Universidade Estadual de Ponta Grossa 4 DEFIS, Universidade Federal do Paraná 5 Departamento de Engenharia Mecânica, Pontifícia Universidade Católica 6 Laboratório de Tribologia-DEMEC, Universidade Federal do Paraná 7 Instituto Nacional de Pesquisas Espaciais (INPE) |
Nome do Evento | Encontro SBPMat, 7. |
Localização do Evento | Guarujá, SP |
Data | 28 set. - 02 out. |
Título do Livro | Anais |
Tipo Terciário | Poster |
Histórico (UTC) | 2008-12-08 16:45:27 :: simone -> administrator :: 2018-06-04 04:05:52 :: administrator -> marciana :: 2008 |
|
3. Conteúdo e estrutura | |
É a matriz ou uma cópia? | é a matriz |
Estágio do Conteúdo | concluido |
Transferível | 1 |
Tipo do Conteúdo | External Contribution |
Palavras-Chave | tribology nitriding ion implantation plasma immersion ion implantation austenitic steel hardness |
Resumo | Friction and wear of AISI 304 austenitic stainless steel implanted with nitrogen by ion implantation (II) and plasma immersion ion implantation (PI3) were studied in this work. Ion implantations at room temperature were carried out at fluences from 2.6 x 1015 to 4.9 x 1017 N+.cm-2 to produce a nitrogen plateau like (300 nm deep) at nominal atomic concentrations ranging from 1% to 27%. The PI3 was performed at 320°C and 400°C to avoid chromium depletion at grain boundaries and at different treatment times. The mechanical properties were characterized by instrumented indentation and reciprocating sliding tests under dry unlubricated condition at room temperature and low humidity. Wear rates were calculated from the resultant groove profiles obtained by perfilometry. Although ion implantation increased surface hardness, it had the deleterious effect of increasing wear. The friction coefficient variation with sliding distance suggests there is rupture of the ion implanted layer, which is rapidly worn out and the observed increase in wear rate is due to a three body abrasion process. On the other hand, samples submitted to PI3 showed a decrease in wear with temperature and time. There is a smooth increase in the friction coefficient with sliding distance, suggesting the deeper modified layer produced by the PI3 process is more effective to improve wear resistance of AISI 304 steels. |
Área | FISPLASMA |
Arranjo | urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Friction and Wear... |
Conteúdo da Pasta doc | não têm arquivos |
Conteúdo da Pasta source | não têm arquivos |
Conteúdo da Pasta agreement | não têm arquivos |
|
4. Condições de acesso e uso | |
Idioma | en |
Grupo de Usuários | simone administrator |
Visibilidade | shown |
Permissão de Leitura | allow from all |
|
5. Fontes relacionadas | |
Unidades Imediatamente Superiores | 8JMKD3MGPCW/3ET2RFS |
Acervo Hospedeiro | sid.inpe.br/mtc-m18@80/2008/03.17.15.17 |
|
6. Notas | |
Campos Vazios | archivingpolicy archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi e-mailaddress edition editor electronicmailaddress format isbn issn label lineage mark mirrorrepository nextedition notes numberoffiles numberofvolumes orcid organization pages parameterlist parentrepositories previousedition previouslowerunit progress project publisher publisheraddress readergroup resumeid rightsholder schedulinginformation secondarydate secondarymark serieseditor session shorttitle size sponsor subject targetfile tertiarymark type url versiontype volume |
|
7. Controle da descrição | |
e-Mail (login) | marciana |
atualizar | |
|